Navionics  Charts; To Display A Navionics Chart; Port Information - Lowrance GlobalMap 4000M Operation Instructions Manual


Navionics
Your GlobalMap 4000M can display Navionics
MMCs. They work just like a MapCreate custom map on an MMC.
Left, entrance to Chesapeake Bay in a MapCreate 6 custom map,
10 mile zoom. Center, same position on Navionics chart at

To display a Navionics chart:

1. Install the Navionics MMC in the memory card compartment and
turn on the unit. (For full card install instructions, see Sec. 2.)
WARNING:
You should never format the MMC containing your
Navionics chart. Formatting the MMC will permanently
erase the chart from the card.
2. From the Map Page, press
. Use ↑ or ↓ to select the Map Name, then press
|
C ENT
HOICE
| |
ENT EXIT EXIT
These figures show menu sequence (from left to right) for selecting a
Navionics chart for the South Chesapeake Bay area.
3. To turn off a Navionics chart, From the Map Page, press
| |↓ to
M D ENT
AP ATA
press |
ENT EXIT

Port Information

Navionics charts contain Port Services information, represented by an-
chor icons on the map display. An example is displayed in the following
figure.
Charts
11.15 mile zoom and right, 5.56 mile zoom.
.
M C
AP HOICE
| .
EXIT
|↓ to
MENU
. Use ↑ or ↓ to select
|
ENT
79

electronic charts on
|
M D ENT
AP ATA
L
OWRANCE
|↓ to
M
AP
|↓ to
MENU
, then