Remove A Waypoint; Edit Waypoint - Lowrance GlobalMap 2000 Installation And Operation Instructions Manual

press the ENT key to save the
waypoint and return to the route
edit screen.
Remove Waypoint
To erase a waypoint from the
list of waypoints used in a route,
first recall the route by pressing
the WAYPT/ROUTE key, then
pressing the key next to the
"Routes" label. Use the arrow
keys to highlight the route you
want to change. Now press the
key next to the "Edit Route"
label. The screen shown at right
appears.
Move the black box to the way-
point you want to erase. Now
press the key next to the "Re-
move Waypt" label. The way-
point is removed from the list.
Press the ENT key to save your
changes.

Edit Waypoint

After a waypoint has been added to a route, any of the elements of that
waypoint can be changed. To do this, first press the arrow keys to move
the black box to the waypoint that you wish to change. Next, press the key
adjacent to the "Edit Waypt" label on the "Edit Route" menu shown above.
The "Edit Waypt" screen is identical to both the waypoint entry and the "Add
from Keys" screens. It lets you change the waypoint's name, symbol, and
location. After making the desired changes, press the ENT key to save
them. The unit returns to the "Edit Route" screen shown above.
Note: If an asterisk * appears next to a waypoint in the list of waypoints used
in a route, then that waypoint has changed since it was added to a route.
For example, if you use waypoint number one in a route and later change
the waypoint's location, then the GlobalMap 2000 will place an asterisk
next to the waypoint's number in the route list. This alerts you to any change
made to any waypoint used in a route, including name, symbol, and
position.
54