Shs-2S - Front View - Lorex SHS-2S Instruction Manual

SHS-2S - Front View

1
2
3
4
1. MULTICOLORED LED INDICATORS- Three LED indicators with different colors:
• Green - Indicates the Power Status (On/OFF)
• Yellow - Indicates the Alarm Status (Alarm Detected)
• Orange - Indicates the Intercom Status (Intercom is ON/OFF)
2. AUTO/MANUAL SCAN BUTTON - Scans through the available cameras. When the switcher
is initially powered on, the scan type is set to AUTO and will cycle through all available cameras
(CAM1-CAM2), displaying one image at a time. The GREEN LED indicator will be ON or flashing
to indicate the switcher is in AUTO SCAN mode.
The AUTO SCAN has a default of 2 seconds per channel. To change this setting, press and
hold the CAM SELECT button for 2 seconds to set the preferred duration:
2 Second Display Interval - The GREEN LED is solid
5 Second Display Interval - The GREEN LED will flash (fast flash)
10 Second Display Interval - The GREEN LED will flash (slow flash)
To view a specific camera, press the AUTO/MANUAL button to set the switcher to Manual
mode (The GREEN LED will be OFF). Individual cameras can be viewed by pressing the CAM
SELECT button.
SHS-2S - Front View
6
5
9