Setting A True Bearing - JRC JMR-7230-S Instruction Manual

8.14 Setting a true bearing

When a gyro signal is input by using GYRO I/F, sometimes the true bearing value indicated by the
master gyro and the true bearing value indicated by this equipment do not match.
In this case, set the true bearing value of this equipment to the value of the master gyro by using the
following procedure.
1
Click on the [Menu] button on the left toolbar.
The menu is displayed.
2
Click on [Settings] - [General] on the menu.
The [General] dialog is displayed.
3
Click on the [GYRO Setting] input box.
4
Enter the master gyro value through the software keyboard.
Section 8 Functions of the ECDIS (Option) 8-60