Target Tracking / Ais Common Operation; Setting Vectors (Vector - JRC JMA-5322-6HS Simplified Manual

5 TARGET TRACKING / AIS COMMON
OPERATION
5.1

Setting Vectors (Vector)

Setting vector mode [VECT R / T]
Procedures
1 Press the [VECT R / T] key.
The current vector mode T (true vector) or R (relative vector) will be displayed in the target
vector display true / relative switching.
Setting vector time on the display (Vector Time)
Procedures
1 Put the cursor on the target vector time setting, and press the
[ENT] key.
The Vector Time value input screen will appear.
2 Enter the value to be set as vector time.
For how to input numeric data on the numeric value input menu, see Section 6.2.
S-18
Simplified Manual