Shs-4Wls Cameras; Installation Warnings - Lorex SHS-4WLS Instruction Manual

SHS-4WLS Cameras

SHS-4WLS Cameras
The SHS-4WLS switcher includes 2 CMOS Color Indoor/Outdoor Wireless Cameras*
INFRARED-RED LEDs -
Provides illumination for low
light conditions
CAMERA LENS
MICROPHONE
STAND -
Metal stand connects to the
Camera for mounting to
walls, ceilings and other
surfaces
POWER CABLE (BACK) -
Connects power to the
camera via the
adapter
MICROPHONE SWITCH -
The default Microphone
Switch is "On".
* Picture changes from Color to B&W under low light conditions on Night Vision Cameras Only.

Installation Warnings:

• Before you install the camera, carefully plan where and how you will position the camera, and
where you will route the cable that connects the camera to an electrical outlet.
• Select a location for the camera that provides a clear view of the area you want to monitor,
which is free from dust, and is not in line-of-sight to a strong light source or direct sunlight.
• Plan the camera location so that it is not close to power or telephone lines, transformers,
microwave ovens or other electrical equipment that could interfere with the system.
• Select a location for the camera that has an ambient temperature between 14
° °
(-10 C~45 C)
• Before starting permanent installation, have another person hold the camera for you while
you verify its performance by observing the image on the monitor.
• This product broadcasts over public airways and its video and audio signals may be intercepted
without your consent.
10
power
° °
F~113 F