Switching between 12-hour and 24-
●
hour Timekeeping
You can specify either 12-hour format or 24-
hour format for the time display.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Press (D) to select 12-hour or 24-hour
timekeeping.
Each press of (D) toggles between 12-
hour and 24-hour timekeeping.
[P] is displayed during p.m. times while
●
12-hour timekeeping is being used.
12-hour timekeeping
24-hour timekeeping
Watch Operation Guide 3522
World Time lets you look up the current time
in any one of 48 cities (29 time zones) around
the globe.
Checking World Time
1.
Enter the World Time Mode.
Navigating Between Modes
l
Entering the World Time Mode displays
the city code of the currently selected
World Time city.
Each press of (D) scrolls through city
●
codes.
For information about city codes, see
●
the information below.
City Table
l
World Time
City code
Setting the World Time City
Use the procedure in this section to select a
World Time city. If you are in an area that
observes summer time, you can also
configure a summer time setting.
1.
Enter the World Time Mode.
Navigating Between Modes
l
2.
Press (D) to display the city code of the
currently selected city.
Holding down (D) scrolls through
●
settings at high speed.
For information about city codes, see
●
the information below.
City Table
l
City code
3.
If you want to configure the summer time
setting, hold down (A) for at least one
second.
[DST] is displayed along with summer
time.
Each time you hold down (A) for at least
●
one second, the setting will toggle
between standard time and summer
time.
Note
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
The summer time setting you configure
●
is applied to the currently selected city
only. It does not affect other cities.
8