Checking The Tide Level And Moon Age For A - Casio 3522 Operation Manual

Checking the Tide Level and
Moon Age for a Specific Date
and Time
You can use the procedures in this section to
look up the tide level (Tide Graph) and Moon
age for a date or time you specify.
1.
Enter the Tide/Moon Mode.
Navigating Between Modes
l
Entering the Tide/Moon Mode displays a
Tide Search screen or Moon Search
screen.
2.
Press (A) to toggle between Tide Search
and Moon Search.
Tide Search
Tide Graph
Month, day
Hour, minute
The screen (Tide Search or Moon
●
Search) that appears first will be the one
that was displayed the last time you
exited the Tide/Moon Mode.
The initial setting of Tide Search is 6:00
●
a.m.
To check the Tide Graph at the top of
●
each hour of the current day
1.
Enter the Tide/Moon Mode.
Navigating Between Modes
l
2.
Press (A) to display the Tide Search
screen.
3.
Use (D) to select the time whose Tide
Graph you want to view.
Each press of (D) advances the time by
●
one hour.
Holding down (D) scrolls through
●
settings at high speed.
Tide Graph
Time
Watch Operation Guide 3522
To scroll the day and check information
●
1.
Enter the Tide/Moon Mode.
Navigating Between Modes
l
2.
Press (A) to display the Moon Search
screen.
3.
Use (D) to select the day whose Moon age
you want to view.
Each press of (D) advances by one day.
●
Holding down (D) scrolls through
●
settings at high speed.
Moon Search
4.
Press (A) to display the Tide Search
screen.
5.
Use (D) to select the time whose Tide
Graph you want to view.
Moon age
Each press of (D) advances the time by
●
one hour.
Holding down (D) scrolls through
●
settings at high speed.
Month, day
Moon age
Tide Graph
Month, day
Time
To check information for a specific date
●
1.
Enter the Tide/Moon Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least one second.
This causes the current year setting to
flash on the display.
Year
3.
Use (C) to display the setting you want to
change.
Each press of (C) cycles through
●
settings in the sequence shown below.
Year
Month
Day
4.
Use (B) and (D) to change the selected
setting.
Holding down (B) or (D) scrolls through
●
settings at high speed.
5.
Repeat steps 3 and 4 to specify the date.
6.
Press (A) to complete the setting
operation.
Note
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
11