Navigating Between Modes
Press (C) to cycle between modes.
Timekeeping Mode
C
Alarm Mode
Tide/Moon Mode
C
Timer Mode
World Time Mode
Stopwatch Mode
C
Watch Operation Guide 3522
Viewing the Face in the Dark
The watch has a light that illuminates the face
for viewing in the dark.
Turning On Display Illumination
●
Press (B) to turn on illumination.
Illumination will turn off automatically if an
●
alarm starts to sound.
C
Important!
C
Frequent use of illumination will run
●
down the battery.
Note
Display illumination is disabled when
●
any one of the conditions below exists.
Alarm, timer alert, or other beeper
ー
sounding
C
Specifying the Illumination Duration
●
You can select either 1.5 seconds or three
seconds as the illumination duration.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least one second.
Release the button when the seconds
start to flash.
Seconds
3.
Press (B) to select an illumination
duration.
[
]: 1.5-second illumination
[
]: 3-second illumination
4.
Press (A) twice to complete the setting
operation.
Note
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
6