Navigating Between Modes
Press (C) to cycle between modes.
Timekeeping Mode
C
World Time Mode
Timer Mode
C
Stopwatch Mode
C
Watch Operation Guide 3561
Viewing the Face in the Dark
The watch has a light that illuminates the face
for viewing in the dark.
Turning On Display Illumination
●
Press (B) to turn on illumination.
Illumination will turn off automatically if an
●
alarm starts to sound.
C
In the Timekeeping Mode, turning on
●
display illumination displays one of eight
different animations.
C
Important!
Alarm Mode
Frequent use of illumination will run
●
down the battery.
Note
Display illumination is disabled when
●
any one of the conditions below exists.
Alarm, timer alert, or other beeper
ー
sounding
Time Adjustment
Use the procedures in this section to adjust the
date and time settings.
Adjusting the Current Time
Setting
Use the procedures in this section to adjust the
date and time settings.
Setting the Time/Date
●
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least one second.
Release the button when the seconds
start to flash.
Seconds
6