Muting An Alert; Auxiliary Audio Jack - Cobra XRS 9700 Operating Instructions Manual

Settings
Your Detector

Muting An Alert

Your detector allows you to quickly turn off an Audio Alert by momentarily
pressing the Program/Mute button. If you press the Program/Mute button
a second time during the Alert, the Audio Alert will be turned back on.
Program/Mute Button
Press and release
To Turn Turn Off Or On An Audio Alert Using The Program/Mute Button
Press and release
Tone
the Program/Mute
None
button.
Auto Mute Mode
Auto Mute will automatically reduce the audio volume of all alerts after
four (4) seconds for as long as the signal is detected. The factory setting
for Auto Mute is on.
To Turn Auto Mute Off Or On Using Program Mode
(See Page 7 For Instructions On Using Program Mode)
In Program mode,
Tone
go to Auto Mute.
One (1) beep
Two (2) beeps
Auto Mute Off
AutoMute Off
12 English
Visual Display
None
Visual Display Voice
Auto Mute Off Auto Mute Off
Auto Mute On Auto Mute On
Auto Mute On
AutoMute On
Voice Alert And Tone Alert Modes
You can set your detector to sound alerts and confirm user settings with
either a Voice or a Tone. The factory setting for Alert mode is Voice.
To Select Voice Or Tone Mode Using Program Mode
(See Page 7 For Instructions On Using Program Mode)
In Program mode,
Tone
go to Voice/Tone.
One (1) beep
Voice Alert

Auxiliary Audio Jack

The Auxiliary Audio Jack can be used to connect an external speaker
in environments with high ambient noise levels. The internal speaker
will be disconnected.
Visual Display Voice
Tone Tone Alert
Voice Voice Alert
Auxiliary
Audio Jack
Nothing comes close to a Cobra ® 13