Muting An Alert; Secondary Icons; Auto Mute Mode - Cobra 14 BAND XRS 878 Operating Instructions Manual

High-performance digital radar/laser detector with xtreme range superheterodyne technology
Table of Contents

Advertisement

Settings
Your Detector
Intro
Operation
Customer
Warranty

Muting an Alert

Assistance
Your detector allows you to quickly turn Off an audio Alert by momentarily
pressing the Mute button. If you press the Mute button a second time
during the Alert, the audio Alert will be turned back On.

Secondary Icons

Auto Mute Mode

Auto Mute will automatically reduce the audio volume of all alerts
after four seconds for as long as the signal is detected. The factory
setting for Auto Mute is On.
Notice
Mute Button
Press and release
To Turn Auto Mute On
Press and release
Tone
the Mute button
Two beeps
again while no
alert is occurring.
To Turn Auto Mute Off
Press and release
Tone
the Mute button
One beep
while no alert
is occurring.
English
8
Voice
Visual Display
Auto Mute On
None
Voice
Visual Display
Auto Mute Off
None
Settings
Your Detector
Main Icons
Intro
Operation
Customer
IntelliMute
Assistance
IntelliMute is a unique feature that allows you to avoid alerts you don't need
to hear because you are stopped or moving slowly. By sensing the "revs"
(RPMs) of your engine, IntelliMute knows when you are at low speed and
Intro
Operation
Customer
Warranty
Assistance
automatically mutes audio radar alerts.
Secondary Icons
Before IntelliMute will work, you must set an activation point for your engine's
revs (see page 10). Whenever the revs are below that point, IntelliMute will
begin muting. The activation point will be stored in memory and recalled
Secondary Icons
each time the power is turned On. The factory setting is IntelliMute Off.
Notice
NOTE
IntelliMute may not work with some vehicles because it cannot sense
Notice
the engine's revs. In such cases, you can reduce unwanted audio alerts
by using Auto Mute and City mode when appropriate.
IntelliMute Button
Press and release
To Turn IntelliMute On
Press and release
Tone
the IntelliMute
Two beeps
button.
To Turn IntelliMute Off
Press and release
Tone
the IntelliMute
One beep
button again.
Warranty
Voice
Visual Display
IntelliMute On
Dot appears next to
the large character
on the right
Voice
Visual Display
IntelliMute Off
Dot disappears
Nothing Comes Close to a Cobra
®
9

Advertisement

Table of Contents
loading

Table of Contents