Attaching the Power Button Cover
Attaching the power button cover that comes with the product onto the power button prevents accidental
operation of the power button. Follow the steps below to attach the power button cover.
1
Open the power button cover.
2
Peel off the backing paper.
3
Attach the power button cover as shown in the illustration.
Align the left edge of the power
button cover with the right edge
of the printer reset button.
Printer reset button
• It is recommended to clean any dirt around the power button before you attach the cover.
• You can also disable the power button using OS settings.
(See
"Functions of the Power button" on page
113.)
Align the inside edge of the power
button cover with the upper edge
of the power button.
Power button
Chapter 2 Setup
2
33