Honeywell NOTIFIER SLC Wiring Manual page 80

Canadian Versions of SLC Devices
UL-listed SLC Device
VES-A00-P-NTF-UL
VES-A10-P-NTF-UL
Bases
B300-6
B300-6-IV
B210LP
B501 (before March 2018)
B501-WHITE
B501-IV
B501-BL
B710LP
B501BH, B501BHT
B501BH-2, B501BHT-2
B224RB-WH, B224RB-IV
B224BI-WH, B224BI-IV
B710HD
B200S-WH, B200S-IV
B200SR-WH, B200SR-IV
Note: Because low-frequency bases are designed for a UL requirement, there is no ULC-listed version of B200S-LF-WH/B200S-LF-IV or
for B200SR-LF-WH/B200SR-LF-IV.
Monitor and Zone Interface Modules
FMM-1
FZM-1
FDM-1
FMM-101
Pull Stations
NBG-12LX
N/A
Control Modules
FCM-1
FCM-1-REL
80
ULC-listed SLC Device
—
—
B3006A
B3006A-IV
B210LPA
B501A (before March 2018)s Legacy ivory; replaced by B501-WHITE/-IV/-BL.
B501-WHITE
(replaces B501A)
B501-IV
B501-BL
B710LPA
B501BHA, B501BHTA
N/A
B224RBA-WH, B224RBA-IV Low Profile Intelligent relay base. Replaces legacy ivory B224RB(A).
B224BIA-WH, B224BIA-IV
B710HDA
B200SA-WH, B200SA-IV,
B200SCOA-WH,
B200SCOA-IV
B200SRA-WH, B200SRA-IV Sounder base. Replaces legacy ivory B200SR(A).
FMM-1A
FZM-1A
FDM-1A
FMM-101A
NBG-12LX
N-MPS Series Addressable
FCM-1A
FCM-1-RELA
Addressable VESDA-E VES scanning detector with LEDs, FlashScan, UL
268 7th edition
Addressable VESDA-E VES scanning detector with 3.5" Display, FlashScan,
UL 268 7th edition
Standard U.S. Low-Profile base (6", 15.24 cm). White.
Standard U.S. Low-Profile base (6", 15.24 cm). Ivory.
Standard U.S. Low-Profile base (6", 15.24 cm). Legacy ivory; replaced by
B300-6/-IV.
Standard European flangeless base (4", 10.16 cm). White.
Ivory version of B501-WHITE.
Black version of B501-WHITE.
Standard U.S. Low-Profile base (6", 15.24 cm). Discontinued.
Sounder base, includes B501/A Sounder base with temporal sounder (UL
8th Edition) Discontinued.
Sounder base, includes B501/A Sounder base with temporal sounder (UL
9th Edition) Discontinued.
Low Profile Intelligent isolator base. Replaces legacy ivory B224BI(A).
Base for a hostile environment detector.Legacy ivory.
Addressable sounder base. Replaces legacy ivory B200S(A), and legacy
ivory B200SCOA.
B200SCOA-WH/IV provides
CO detector markings in English/French, for
Canadian applications only.
Used for normally open contact alarm initiating devices, such as manual pull
stations, four-wire smoke detectors, heat detectors, waterflow, and
supervisory devices.
Used to interface with two-wire smoke detectors in addition to normally open
contacts.
Provides two independent 2-wire Initiating Device Circuits (IDCs) at two
separate, consecutive addresses. Wire supervised IDCs as NFPA Class B or
Class A circuits. The modules come with a thermoplastic cover for mounting
to a 4-inch (10.16 cm) square mounting box.
Functionally similar to the FMM-1 Monitor Module, but offered in a smaller
package for mounting directly in the electrical box of the device being
monitored. (Class B input circuit only.)
An addressable manual pull station with key-lock reset feature. The
addressable module is housed within the pull station.
Addressable manual pull stations with hex-key reset feature. The
addressable module is housed within the pull station.N-MPS-SA/N-MPS-
SAC are single-stage; N-MPS-2A/N-MPS-2AC are dual stage. All models
include screw terminal connectors and a hex key reset. Two-stage manual
stations include a keyswitch and one key. N-MPS-SAC and N-MPS-2AC
include N/C ancillary contact.
Control Module, NAC: Addressable Control Module used as Notification
Appliance Circuits (NACs) to power and supervise compatible, UL-listed
notification appliances. Wired supervised NACs as NFPA Class B or Class
A. The modules come with a thermoplastic cover for mounting to a 4-inch
(10.16 cm) square mounting box.
Control Module for releasing applications. FlashScan only.
(For use with NFS2-3030, NFS2-640, NFS-320(C), and NFS-320SYS.)
Notifier SLC Wiring Manual — P/N 51253:U9 12/3/2021
Description