Wiring a Detector Base
Figure 10.2 shows typical wiring of the B710HD detector base (for use with a HARSH™ detector) connected to an SLC. An optional
RA100Z Remote LED Annunciator is shown connected to the base.
NOTE: Use a spade lug to wire the Remote LED Annunciator (–) to Terminal 2 (–).
Notifier SLC Wiring Manual — P/N 51253:U9 12/3/2021
SLC
To compatible
UL Listed
Power Supply
Figure 10.2 Wiring of the B710HD Detector Base
Intelligent Detectors, Intelligent Detector Bases, and Wireless Gateway
To next device
on SLC
Power to next
device
RA100Z
Remote LED
Annunciator
(Optional)
For connection of
cable shield
55