Philips HF367X Series Manual page 11

AmbiTrack sensors
Setting up your appliance without the app
- If you previously chose to set up your appliance without the app,
but now want to connect your appliance to the app you press and
hold the Wi-Fi icon for 8 seconds. The access point mode icon will
be shown on the display
connect.
- If you have changed your Wi-Fi home network or changed your
password, you also need to press and hold the Wi-Fi icon for 8
seconds . You will see the access point mode icon on the display
.Open the app on your smartphone to connect.
Note: Make sure your smartphone is connected to the Wi-Fi network
you use in your bedroom.
Note: The app on your smartphone and your connected Sleep &
Wake-Up Light can ONLY communicate with each other when both
appliances are connected to the same home Wi-Fi network.
Note: You cannot remotely control the device through the app (e.g. set
an alarm) if you are not connected to your home Wi-Fi network or if
your smartphone is connected to 4G.
This Wi-Fi connection issue icon might appear on the display if a
connection cannot be established. Check the troubleshooting section
to solve the problem (see 'Connectivity troubleshooting').
The connected Sleep & Wake-Up Light collects input from its
surroundings through the AmbiTrack sensors. AmbiTrack sensors
measure light, humidity, temperature and sound pressure. These
factors can influence your sleep. Only in the app you can see
information on the recommended values for ideal sleep conditions.
The measurements of the sensors can be influenced by the
surroundings of the connected Sleep & Wake-Up Light.
For example, if you place the appliance next to a window or near a
heating source such as a radiator, the temperature and humidity
sensors might not represent the temperature / humidity of the entire
room.
You can set up the Sleep & Wake-Up Light without the app. Before
you can use the appliance, a setup wizard on the appliance needs to
be completed first. You can connect the appliance to the app later
(see 'Easy Wi-Fi setup').
We strongly recommend you to set up your appliance with the
SleepMapper app in order to enjoy all functionalities the app offers.
. Open the app on your smartphone to
English
11