Upgrade; About; Figure 5-6: Upgrade Screen; Figure 5-7: About Screen - Linksys PLE200 User Manual

PowerLine AV Ethernet Adapter

Upgrade

Use this screen to upgrade the connected Adapter's firmware.
Status. Displayed here is the MAC address of the Adapter currently accessed by your computer.
Device Information
MAC Address. Displayed here is the MAC address of the Adapter.
Firmware Version. Displayed here is the firmware version of the Adapter.
Device Upgrade
To upgrade the Adapter's firmware, follow these instructions:

Figure 5-6: Upgrade Screen

1. Download the Adapter's firmware from the Linksys website at www.linksys.com.
2. Extract the firmware file on your computer.
3. Enter the location of the firmware's file, or click the Browse button to find the file.
4. Click the Upgrade button, and follow the on-screen instructions.
To exit the Configuration Utility, click Exit.

About

The About screen displays information about the connected Adapter and a link to the Linksys website,
www.linksys.com.
Status. Displayed here is the MAC address of the Adapter currently accessed by your computer.
Ver. Displayed here is the version number of the Configuration Utility.
Click the WWW.LINKSYS.COM button to visit the Linksys website, www.linksys.com. (You must have an active
Internet connection to use this link.)

Figure 5-7: About Screen

Chapter 5: Using the Configuration Utility 13
Upgrade