PowerLine AV Ethernet Adapter
5. Connect one end of an Ethernet network cable to the Ethernet port of the Adapter. Connect the other end to an
Ethernet port on your computer, which is running the Setup Wizard.
Plug the Adapter into an electrical outlet.
IMPORTANT: Because the Adapter sends data over the powerlines of your residence, Linksys
recommends that you plug the Adapter directly into an electrical outlet. The Adapter has its
own power filter for protection against surges.
Then click Next.
Chapter 4: Installing the Adapter
Instructions for the Setup Wizard
Plugs Directly into Outlet
Figure 4-5: Connection to a Desktop Computer
Figure 4-4: Connect the Adapter
5