Instructions For Connection; Figure 4-8: Plug Into The Outlet - Linksys PLE200 User Manual

PowerLine AV Ethernet Adapter

Instructions for Connection

1. If the Adapter is for the computer it is already connected to, then the installation is complete. Proceed to
"Chapter 5: Using the Configuration Utility".
If the Adapter is for a different network device, then proceed to step 2.
2. Disconnect the Ethernet network cable from the computer.
3. Unplug the Adapter from its electrical outlet.
4. Connect the Ethernet network cable to the appropriate network device.
5. Plug the Adapter into an electrical outlet.
IMPORTANT: Because the Adapter sends data over the powerlines of your residence, Linksys
recommends that you plug the Adapter directly into an electrical outlet. The Adapter has its
own power filter for protection against surges.
Congratulations! The installation of the PowerLine AV Ethernet Adapter is complete.
Proceed to "Chapter 5: Using the Configuration Utility".
Chapter 4: Installing the Adapter
Instructions for Connection

Figure 4-8: Plug into the Outlet

7