Specifications; Specifications For Eg1032 - Linksys EG1032 User Manual

Network applications that want to save processing time because they have very
small data units to exchange (and therefore very little message reassembling to
do) may prefer UDP to TCP.
Upgrade - To replace existing software or firmware with a newer version.
Upload - To receive a file transmitted over a network. In a communications ses-
sion, upload means transmit, download means receive.
URL (Uniform Resource Locator) - The address that defines the route to a file
on the Web or any other Internet facility. URLs are typed into the browser to
access Web pages, and URLs are embedded within the pages themselves to
provide the hypertext links to other pages.
UTP - Unshielded twisted pair is the most common kind of copper telephone
wiring. Twisted pair is the ordinary copper wire that connects home and many
business computers to the telephone company. To reduce crosstalk or electro-
magnetic induction between pairs of wires, two insulated copper wires are
twisted around each other. Each signal on twisted pair requires both wires.
Since some telephone sets or desktop locations require multiple connections,
twisted pair is sometimes installed in two or more pairs, all within a single
cable.
VLAN (Virtual LAN) - A logical association that allows users to communicate
as if they were physically connected to a single LAN, independent of the actu-
al physical configuration of the network.
Wake-on-LAN - Wake on LAN is a technology that allows a network profes-
sional to remotely power on a computer or to wake it up from sleep mode.
WAN - A communications network that covers a wide geographic area, such as
state or country.
WINIPCFG - Configuration utility based on the Win32 API for querying,
defining and managing IP addresses within a network. A commonly used util-
ity for configuring networks with static IP addresses.
Workgroup - Two or more individuals that share files and databases.
67
Instant Gigabit Series Instant Gigabit Network Adapter (EG1032/EG1064)

Specifications

Specifications for EG1032

Model EG1032
Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE
802.3ad, IEEE 802.1p, IEEE802.1Q, PCI 2.1,
PCI 2.2, ACPI
Protocol CSMA/CD
Ports: 1 Straight-Through
10BaseT/100BaseTX/ 1000BaseT RJ-45 Port
Interface: PCI Local Bus Version 2.1 or better
Cabling Type: 10BaseT: UTP/STP Category 3 or better
100BaseTX: UTP/STP Category 5 or better
1000BaseT: UTP/STP Category 5e or better
Topology: Star
Speed: Full Duplex: 20Mbps, 200Mbps or 2000Mbps
Half Duplex:10Mbps, 100Mbps or 1000Mbps
WOL Support: Remote Wake-Up
Power Management Event (PME)
Bus Type: 32-Bit PCI
LEDs: Link/Activity, 1000Mbps
68