Installing Nt Networking And The Network Adapter Driver - Linksys EG1032 User Manual

Installing NT Networking and the Network Adapter Driver

1. After clicking on Yes, the Network Setup Wizard window will appear.
2. Put a checkmark next to the Wired to the network option. Click Next.
3. Click on the Select from list... button to select a network adapter.
4. Click on the Have Disk button. Insert the Instant Gigabit Network Adapter
Driver Disk into drive A. Type a:\ into the box on your screen and click
OK.
19
Instant Gigabit Series Instant Gigabit Network Adapter (EG1032/EG1064)
5. Highlight the Linksys EG1032/EG1064 Instant Gigabit Network
Adapter entry in the window that appears. Click OK.
6. The adapter will be added to the list of installed Network Adapters. Click
Next.
20