Linksys EG1032 User Manual page 11

4. Make sure that Search for the best driver for your device
(Recommended) is selected. Check the Specify a location option and
enter A:\WINME in the drop down box. Click Next.
5. Once the driver has been located, the following screen will appear. Click the
Next button.
15
Instant Gigabit Series
Instant Gigabit Network Adapter (EG1032/EG1064)
6. At this point, the installation may require files from your Windows
Millennium CD-ROM. If prompted, insert your Windows Millennium CD-
ROM into your CD-ROM drive and enter d:\win9x in the box that appears
(where "d" is the letter of your CD-ROM drive). If you were not supplied
with a Windows Millennium CD-ROM, your Windows files may have been
placed on your hard drive by your computer manufacturer. While the loca-
tion of these files may
c:\windows\options\cabs as the path. Try entering this path into the box. If
no files are found, check your computer's documentation or contact your
computer manufacturer for more information.
7. Once the driver is installed, the following screen will appear. The default
settings should allow the Adapter to function properly. Click the OK button
to continue. For more information about these settings, refer to the
Advanced Settings section of this manual.
vary , many manufacturers use
16