Dim Button - Cobra ESD-9220 WX Operating Instructions Manual

Operation
Turning Turning On Your ESD-9220 WX
On Your
ESD-9220 WX
Plug power cord
1
into detector.
Rotate ON-OFF Volume Control to the left
(away from you). In both Tone and Voice
Modes, the unit will announce "Testing" ,
followed by three beeps. This confirms Power
ON. All LEDs will light up from left to right in
sequence and announce "System Ready."
The system indicates if Voice Alert™ or Tone
Only Mode has been selected and if VG-2
Audio Alert is turned On or Off.
10

Dim Button

You may select from three levels of brightness for your
Cobra® ESD-9200 WX display: Bright, Dim, and Dark.
Plug power cord
2
into cigarette lighter.
City/
PRESS &
RELEASE
Press and release DIM button to reduce the
1
LED display brightness to Dim. A single beep
confirms dim LED brightness.
City/
PRESS &
RELEASE
AGAIN
Press and release DIM button again to turn
2
LED display off. A single beep confirms no LED
display. The power LED will stay on dim.
City/
PRESS &
RELEASE
3RD TIME
Press and release DIM button a third time to
3
return led display to Bright. A double beep
confirms normal LED brightness.
Operation
Dim Button
Note
In Voice Alert™ Mode, the
message "Bright, Dim, or
Dark" will also be heard.
Note
Bright = "Beep-Beep"
Dim = "Beep"
Dark = "Beep"
Note
The factory default setting
is Bright Mode.
Note
The ESD-9220 WX will
retain the chosen Mode
while OFF.
11