Dim Button; Highway/City Mode - Cobra ESD9550 How To Use Manual

*9550.MANUAL 8/9/00 12:21 PM Page 10
Operation

Dim Button

Dim Button
You may select from four levels of bri g htness for
your Co b ra ESD-9550 display: Bri g ht, Di m , Di m m e r
and Da rk (Of f) .
Note
Press and release Dim button once to reduce
1
Bright = "Beep-Beep"
brightness to Dim.A single beep confirms this
Dim = "Beep"
selection.
Dimmer = "Beep"
Dark = "Beep"
Note
2 Press and release Dim button twice to reduce
The ESD-9550 will retain
the display brightness to Dimmer. A single
the chosen brightness level
beep confirms dim led brightness.
while OFF.
Press and release Dim button a third time to
3
reduce display to dark (Off).A single beep
confirms this selection. The power light will
remain on.
10
4 Press and release Dim button a fourth time
to return display to Bright. A double beep
confirms this selection.

Highway/City Mode

Highway/City
The Highway/City function is controlled by a
Mode
2 - s tep butto n .
To select City Mode:
Note
Use City Mode in or near
cities where there are many
sources of false radar
signals such as microwave
Press and release City button and CTY will
relay towers and automatic
1
be displayed for 2 seconds followed by c. A door openers.This will filter
single beep confirms City mode. out weak signals.
Continued
11
Operation