Table of Contents
Advertisement
Operation
Turning On
Turning on Weather and Changing Stations
Weather and
Your ESD-9220 WX will allow you to listen to any
of more than 550 local weather stations in the US
Changing
and Internationally. If any Radar, Laser, or Safety
Stations
Alert® signal is detected while you are listening to
Weather, it will automatically over-ride the weather
Note
station and give you that alert.
Both Weather On/Off and
Press and release
Weather Alert On/Off
1
weather radio. When activated the Wx LED will
settings, including the last
come on and the unit will announce "Weather On"
station you were listening to,
in Voice Mode or signal two beeps in Tone Mode.
are retained in memory even
If no station is heard, press and release
when unit is turned OFF.
2
City/ Wx
Note
10 channels until a station is received and the
Factory default setting is
Wx LED stays lit. The WxLED acts like a signal
Weather Off and Weather
strength meter for the weather radio. When
Alert Off Mode.
the signal is strong, the Wx LED will stay lit. If
the station signal weakens, the Wx LED will
flicker or if the signal is completely lost, the
ESD-9220 WX will go into Radar Mode. When
a station cannot be received, the unit will
announce "Weather Signal Lost" in Voice Mode
or signal one beep in Tone Mode and the Wx
LED will turn Off.
Press and release
3
weather radio. When deactivated the unit will
announce "Weather Off" in Voice Mode or
signal one beep in Tone Mode.
14
Wx button to activate
CITY/Wx
button to step through the
Wx button again to turn off
City/
PRESS &
RELEASE
Set Weather Alert
Press
WX button for more than 2 seconds to
1
activate Weather Alert. When activated the unit
will announce "Weather Alert On" in Voice Mode
or signal two beeps in Tone Mode. When in Wx
Alert On Mode, the Wx LED will blink slowly,
even though you do not hear the weather radio.
If a Weather Alert is received,"Weather Alert On"
will be heard in Voice Mode and then the
Weather Station broadcast will be heard telling
you about the severe weather.
Caution: Weather Alert will only operate if a Weather Station
is being received and the WxLED is blinking. If the Wx LED
stops blinking, you cannot receive a Wx Alert. If you have
not received a weather station for 1 minute,"Weather Signal
Lost" will be announced in Voice Mode or one beep will be
heard in Tone Mode and the Wx LED will stop blinking.
The ESD-9220 WX however, will still monitor for that station
to return. If, after 5 minutes the station is not received,
" Weather Alert Off" will be heard and the ESD-9220 WX will
stop monitoring.Weather Alert can then be reset by turning
on the Weather Radio and finding a different weather station.
City/
Press
WX button again for more than
2
2 seconds to turn off Weather Alert. When
deactivated the unit will announce "Weather
Alert Off" in Voice Mode or signal one beep in
Tone Mode and the Wx LED will stop blinking.
Operation
Set Weather
Alert
Note
If you set your ESD-9220 WX
to Weather Alert Mode, it
will automatically turn on
the Weather Radio if the US
Weather Service calls a
Severe Weather Alert. If
you receive a Weather Alert,
please listen to the
broadcast and take their
advice.
Note
If you try to turn on Weather
Alert and no station can be
received, the unit will not go
into Weather Alert Mode
and announce "Weather
Alert Off" in Voice Mode or
PRESS &
one beep will be heard in
HOLD
Tone Mode and the Wx LED
will not blink.
15
Advertisement
Table of Contents
