Sim Card Installation; Figure 4-11: Slide Down The Sim Card Cover; Figure 4-12: Slide And Lift Sim Card Holder And Insert Sim Card; Figure 4-13: Fold Down The Sim Card Holder And Slide Into Place - Linksys WRTU54G-TM User Manual

Wireless-G Broadband Router with 2 Phone Ports

SIM Card Installation

Two SIM cards are required for a 2-line configuration.
To install a SIM card, follow these steps:
1. Slide the SIM card cover down, then lift off.
2. Gently slide up the SIM card holder. Then from the bottom side, carefully lift up the SIM card holder. Do not lift
the holder until it is correctly in place or it could break.
3. Position the SIM card with the gold metal side up and towards the card slot opening. Carefully insert the SIM
card into the slot until it lines up with the bottom edge of the top piece of the holder and before it hits the
bottom piece of the holder or the SIM card or holder could break.
4. Fold down the SIM card holder and slide down into place.
5. Replace the SIM card cover. You might need to push it hard to lock it in place.
Chapter 4: Connecting the Wireless-G Broadband Router with 2 Phone Ports
SIM Card Installation

Figure 4-11: Slide Down the SIM Card Cover

Bottom Piece
of Holder
Bottom Side
2
Slide up SIM card holder this
direction

Figure 4-12: Slide and Lift SIM Card Holder and Insert SIM Card

Figure 4-13: Fold Down the SIM Card Holder and Slide into
1
Slide SIM in only this far
and not to the bottom
3
Top Piece of
Holder
4
Place
13