Linksys WRTU54G-TM Setup And Troubleshooting Manual

Manual Setup,
Feature Guide,
& Troubleshooting
T-Mobile @Home ® HiPort ™ Wireless Router
TM 1491
3
Insert SIM card
Hold your HiPort with the rubber feet facing Gently slide the black SIM card holder
towards you. Remove the SIM card cover labeled Line 1 forward until it clicks
by sliding it down and lifting away from the unlocked.
router.
1 2
Note: Inserting the SIM card into Line 1 activates
the Phone 1 port on your HiPort.
4
Option A Use HiPort to Create a Network
Unplug your modem from the power outlet Plug the Ethernet cable from your
and your computer. modem into your new HiPort's blue
Internet port.
1 2
Power
Computer
Modem
Modem
Option B Add HiPort to Existing Network
Disconnect the cable from your computer's Plug the power cable into the new HiPort's
network port that comes from your existing power port and the other end into the
router. electrical outlet.
1 2
Power
Computer
Modem
Router
Note: If you experience voice quality issues with
this setup, remove existing router from network,
and use the instruction under "Option A".
1
Getting Started
Requirements:
CD Contents:
The CD contains additional information that is not included on this poster,
such as additional setup scenarios and the router User Guide. Mac
explore the CD to view the User Guide.
SPANISH: Consulta el CD para obtener la versión en español de este póster y
del Asistente de instalación.
Once unlocked, the SIM card holder will
easily swing open when lifted from the
bottom.
3
First, plug your modem's power cable into
an electrical outlet. Next, plug your HiPort's
power cable into the router and the electrical
outlet.
3
Power Power
Computer
HiPort
Modem
Plug a cable coming from one of your existing
router's numbered Ethernet ports into your
new HiPort's blue Internet port.
3
Power Power
Computer
HiPort
Modem Modem
Router
•
PC Users
: Insert the CD included with your router and run
the Setup Wizard to begin the installation process.
•
Mac & Advanced PC Users: Reference this poster for
®
basic and advanced setup instructions.
•
High speed Internet connection : Cable, DSL, T1.
•
Home phone : Corded or cordless—No rotary phones or
2.4 GHz cordless phones.
•
Wired connection to Internet from computer (Ethernet
Cable, not USB)
users can
®
Slide the SIM card into the lid of the SIM card
holder with the gold contacts facing out, as
shown.
4
Caution: Using excessive force may break the
SIM card holder
Plug one end of the blue Ethernet cable that
comes with your HiPort into your computer and
the other end into one of your HiPort's yellow
ETHERNET ports.
4
Power
Computer
HiPort
Modem
Plug one end of the blue Ethernet cable that
comes with your HiPort into your computer and
the other end into one of your HiPort's yellow
ETHERNET ports.
4
Power
Computer
HiPort
Modem
Router Router
2
Activating Service
Activating home phone service
In order to use your home phone with your new T-Mobile @Home HiPort Wireless Router,
you must first activate the service with T-Mobile. If you have not yet done so, please contact
Customer Care at 611 on your mobile phone or Toll-Free at 1-800-TMOBILE from any phone.
Your SIM card will then be active, and you can insert it into your new HiPort™ and begin using
the home phone service.
SIM card
Close the SIM card holder and slide down to
lock into place, as shown below. Next, replace
the SIM card cover on the casing by pushing
until the cover clicks into place.
5
Plug your home phone's cable into the green
port labeled Phone 1 on your HiPort.
5
Home
Phone
Computer
HiPort
HiPort
Plug your home phone's cable into the green
port labeled Phone 1 on your HiPort.
5
Home
Phone
Computer
HiPort
HiPort
Extend the Antenna and slide your HiPort into
place on the stand.
6
Note: For improved reception, elevate your HiPort
as high as possible from the ground. Also, keep
away from other devices such as routers and
monitors that interfere with wireless reception.
Wait up to 15 minutes for all of the lights
below to come on.
6
Home
Phone
Internet
Phone 1
Wireless
Ethernet
Power
If any of these lights do not come on
within 15 minutes, see the section labeled
"Troubleshooting" on the back of the poster.
Wait up to 15 minutes for all of the lights
below to come on. While you wait, plug your
home phone into the Phone 1 port on your
router.
6
Home
Phone
Internet
Phone 1
Wireless
Ethernet
Power
If any of these lights do not come on
within 15 minutes, see the section labeled
"Troubleshooting" on the back of the poster.