The Front Panel; Figure 3-2: The Router's Front Panel - Linksys WRTU54G-TM User Manual

Wireless-G Broadband Router with 2 Phone Ports

The Front Panel

The Router's LEDs are located on the front panel.
Power Green. The Power LED lights up and will stay on while the Router is powered on. When the
Router goes through its self-diagnostic mode during every boot-up, this LED will flash. When
the diagnostic is complete, the LED will be solidly lit.
Ethernet 1-4 Green. These numbered LEDs, corresponding with the numbered ports on the Router's back
panel, serve two purposes. If the LED is continuously lit, the Router is successfully connected
to a device through that port. A flashing LED indicates network activity over that port.
Wireless Green. The WLAN LED lights up whenever there is a successful wireless connection. If the LED
is flashing, the Router is actively sending or receiving data over the network.
Phone1/Phone2 Blue. This LED lights up blue when a SIM card is correctly installed and registered. It will blink
when you have new voicemail.
Internet Green. The Internet LED lights up when there is a connection made through the Internet port.
The LED flashes when there is traffic.
Pairing Green. The LED lights up green when wireless security is enabled. When the Pairing button is
pushed, the Pairing LED flashes amber, then when the pairing is done, the LED lights up green.
Chapter 3: Getting to Know the Wireless-G Broadband Router
The Front Panel

Figure 3-2: The Router's Front Panel

7