Can I Wall-Mount The Linksys Wrt1900Acs; Is The Linksys Wrt1900Acs Stackable; Does The Linksys Wrt1900Acs V1 Support Open Source; What Is The Wireless Scheduler Feature Of My Linksys Wrt1900Acs And How Can I Use It - Linksys WRT1900ACS Frequently Asked Questions Manual

Linksys Official Support - Linksys WRT1900ACS Frequently Asked Que...
The Network Map feature of your Linksys WRT1900ACS allows you to manage and monitor your
devices' connection to the network. For an overview of the functions of your Network Map Tool, click
here(https://kb.linksys.com/us/support-article?articleNum=136118). To know how to manage devices
using the Network Map Tool, click here(https://kb.linksys.com/us/support-article?articleNum=138954).

10. Can I wall-mount the Linksys WRT1900ACS?

Yes. For instructions on how to wall-mount, click here(https://kb.linksys.com/us/support-
article?articleNum=140774).

11. Is the Linksys WRT1900ACS stackable?

Yes, the Linksys WRT1900ACS is stackable. However, it is recommended that it should be stacked on
top of other stackable devices. Do NOT stack any other devices on top of it to prevent blocking the
ventilation of the router.

12. Does the Linksys WRT1900ACS v1 support Open Source?

Yes, Linksys WRT1900ACS v1 is Open Source-ready. With this, the Open Source community's
demand for Linksys router source codes is met. The base source code is made available for coders to
be able to tweak their own firmware. However, Linksys will only support the official firmware. Since
only the base codes are available, the final consumer codes would have its own security encoding,
which makes it safe for daily use.

13. What is the Wireless Scheduler feature of my Linksys WRT1900ACS and how can I use it?

The Wireless Scheduler feature of your Linksys WRT1900ACS allows you to turn OFF or ON the
wireless networks, including the Guest networks at your preferred time. To know more about this, click
here(https://kb.linksys.com/us/support-article?articleNum=140821).
SETUP & INSTALLATION

1. What requirements are needed in setting up the Linksys WRT1900ACS?

Before setting up the Linksys WRT1900ACS, you will need the following:
A broadband Internet connection
At least one (1) computer with a wired or wireless network adapter
RJ45 Ethernet cable/s
Internet browser (Internet Explorer® 8 or higher, Firefox® 8 or higher, Google Chrome™ 10 or higher,
or Safari® 5 or higher)

2. How do I set up the Linksys WRT1900ACS?

6 of 13
https://www.linksys.com/us/support-article?articleNum=178015
7/8/2019, 10:19 AM