Static Routing Configuration Commands; Delete Static-Routes All; Ip Route-Static - H3C S5120-EI Series Configuration Commands

Static routing configuration commands

NOTE:
router
The term
Static routing configuration commands

delete static-routes all

Syntax
delete static-routes all
View
System view
Default level
2: System level
Parameters
None
Description
Use the delete static-routes all command to delete all static routes.
When you use this command to delete static routes, the system will prompt you to confirm the operation
before deleting all the static routes.
Related commands: ip route-static and display ip routing-table.
Examples
# Delete all static routes on the router.
<Sysname> system-view
[Sysname] delete static-routes all
This will erase all ipv4 static routes and their configurations, you must reconfigure all
static routes
Are you sure?[Y/N]:Y

ip route-static

Syntax
ip route-static dest-address { mask | mask-length } { next-hop-address [ track track-entry-number ] |
interface-type interface-number [ next-hop-address ] } [ preference preference-value ] [ description
description-text ]
undo ip route-static dest-address { mask | mask-length } [ next-hop-address | interface-type
interface-number [ next-hop-address ] ] [ preference preference-value ]
in this document refers to both routers and Layer 3 switches.
18