Display Ip Routing-Table Statistics - H3C S5120-EI Series Configuration Commands

display ip routing-table statistics

Syntax
display ip routing-table statistics [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the display ip routing-table statistics command to display the route statistics of the network routing
table.
Examples
# Display route statistics in the routing table.
<Sysname> display ip routing-table statistics
Proto
DIRECT
STATIC
Total
Table 3 Output description
Field
Proto
route
active
added
deleted
freed
Total
route active
24 4
4 1
28 5
Description
Origin of the routes.
Number of routes from the origin
Number of active routes from the origin
Number of routes added into the routing table since the router started up or the routing
table was last cleared
Number of routes marked as deleted, which will be freed after a period.
Number of routes that got freed (removed permanently)
Total number
added deleted
25 1
4 0
29 1
9
freed
0
0
0