Display Ipv6 Routing-Table Statistics - H3C S5120-EI Series Configuration Commands

Description
Use the display ipv6 routing-table protocol command to display routes of a specified routing protocol.
Examples
# Display brief information about all direct routes.
<Sysname> display ipv6 routing-table protocol direct
Direct Routing Table :
Summary Count : 1
Direct Routing Table's Status : < Active >
Summary Count : 1
Destination: ::1/128
NextHop
Interface
Direct Routing Table's Status : < Inactive >
Summary Count : 0
See Table 2

display ipv6 routing-table statistics

Syntax
display ipv6 routing-table statistics [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the display ipv6 routing-table statistics command to display routing statistics, including total route
number, added route number and deleted route number.
Examples
# Display routing statistics.
<Sysname> display ipv6 routing-table statistics
Protocol
DIRECT
: ::1
: InLoop0
for description of the output.
route active
1 1
added deleted
1 0
14
Protocol : Direct
Preference: 0
Cost : 0
freed
0