Display Ipv6 Routing-Table Verbose - H3C S5120-EI Series Configuration Commands

STATIC
Total
Table 5 Output description
Field
Protocol
route
active
added
deleted
freed
Total

display ipv6 routing-table verbose

Syntax
display ipv6 routing-table verbose [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the display ipv6 routing-table verbose command to display detailed information about all active
and inactive routes, including the statistics of the entire routing table and information for each route.
Examples
# Display detailed information about all active and inactive routes.
<Sysname> display ipv6 routing-table verbose
Routing Table :
Destinations : 1
Destination
NextHop
RelayNextHop : ::
Neighbour
3 0
4 1
Description
Routing protocol
Route number of the protocol
Number of active routes
Routes added after the last startup of the router
Deleted routes, which will be released after a specified time
Released (totally removed from the routing table) route number
Total number of routes
: ::1
: ::1
: ::
3 0
4 0
Routes : 1
15
0
0
PrefixLength : 128
Preference : 0
Tag : 0H
ProcessID : 0