Reset Ip Routing-Table Statistics Protocol - H3C S5120-EI Series Configuration Commands

Interface
State
Tunnel ID
Age
Table 6 Output description
Field
Destination
PrefixLength
Nexthop
Preference
RelayNextHop
Tag
Neighbour
ProcessID
Interface
Protocol
State
Cost
Tunnel ID
Label
Age

reset ip routing-table statistics protocol

Syntax
reset ip routing-table statistics protocol { protocol | all }
View
User view
Default level
2: System level
Parameters
protocol: Clears statistics for the IPv4 routing protocol, which can be direct or static.
all: Clears statistics for all IPv4 routing protocols.
Description
Use the reset ip routing-table statistics protocol command to clear routing statistics for the routing table.
Examples
# Clear all the routing statistics.
: InLoopBack0
: Active NoAdv
: 0x0
: 22161sec
Description
Destination IPv6 address
Prefix length of the address
Next hop
Route priority
Recursive next hop
Tag of the route
Neighbor address
Process ID
Outbound interface
Routing protocol
State of the route, Active, Inactive, Adv (advertised), or NoAdv (not
advertised)
Cost of the route
Tunnel ID
Label
Time that has elapsed since the route was generated
Protocol
Cost
Label
16
: Direct
: 0
: NULL