Display Ipv6 Routing-Table Ipv6-Address1 Ipv6-Address2 - H3C S5120-EI Series Configuration Commands

Summary Count: 3
Destination: 10::/64
NextHop
Interface
Destination: 10::/68
NextHop
Interface
Destination: 10::/120
NextHop
Interface
# Display brief information about the matched route with the longest prefix length.
<Sysname> display ipv6 routing-table 10:: 127 longer-match
Routing Tables:
Summary Count : 1
Destination: 10::/120
NextHop
Interface
See Table 2

display ipv6 routing-table ipv6-address1 ipv6-address2

Syntax
display ipv6 routing-table ipv6-address1 prefix-length1 ipv6-address2 prefix-length2 [ verbose ] [ |
{ begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
ipv6-address1/ipv6-address2: An IPv6 address range from IPv6 address1 to IPv6 address2.
prefix-length1/prefix-length2: Prefix length, in the range 0 to 128.
verbose: Displays both active and inactive verbose routing information. Without this keyword, only brief
active routing information is displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
: ::
: NULL0
: ::
: NULL0
: ::
: NULL0
: ::
: NULL0
for description of the output.
Protocol
Preference: 60
Cost
Protocol
Preference: 60
Cost
12
: Static
: 0
: Static
: 0
Protocol : Static
Preference: 60
Cost : 0
Protocol : Static
Preference: 60
Cost : 0