Table of Contents
Advertisement
GENERAL OPERATING INSTRUCTIONS
CONTROLS
The refrigerator is factory set between 34°F and 42°F.
If a minor adjustment is needed to make the
cabinet colder, turn thermostat dial (located inside cabinet
on blower housing) slightly clockwise. A 1/8 turn represents
approximately 7°F.
NEVER ATTEMPT TO USE A REFRIGERATOR
MODEL AS A FREEZER BY
ADJUSTING THERMOSTAT COLDER.
All controls, valves, compressor and electrical components
are located behind the rear panel for easy accessibility.
A removable condensation pan, located in the rear of
the cabinet, may be removed and emptied as needed.
One pilot light will indicate when your cabinet is plugged in,
and will always remain on. The other pilot light (cycling
light) will indicate when your cabinet has reached proper
temperature, and will go on and off as the compressor
operates to maintain temperature.
5
Advertisement
Table of Contents
