Management Setup Menu - Linksys EF1324 User Manual

Switch Information
The Switch Information screen displays hardware and firmware version num-
bers for the main board, as well as the power status.
• Hardware Version - Hardware version of the main board.
• Firmware Version - System firmware version in ROM.
• Serial Number - Serial number of the main board (MAC address of the
Switch).
• Port Number - Number of ports available on this Switch.
• Power Status - Shows if power is active or inactive.
• Redundant Power Status - Status of redundant power supply.
• Fan Power Status - Shows if power to fan is active or inactive.
• G1 Information - Speed of the first Gigabit port.
• G2 Information - Speed of the second Gigabit port.
Select OK to return to the previous panel.
16
Instant EtherFast Series
®
EtherFast Layer 3 Management 24-Port 10/100 + 2-Port Gigabit Ethernet Switch
®

Management Setup Menu

The Management Setup Menu screen allows you to configure the IP address
for the Switch, serial port settings for console management, SNMP parameters,
and user privileges.
• Network Configuration - Includes IP setup, ping facility, and HTTP setup
for the on-board Web agent.
• Serial Port Configuration - Sets communication parameters for the serial
port, including baud rate, console time-out, and screen data refresh interval.
• SNMP Configuration - Activates authentication failure traps and configures
communities and trap managers.
• User Configuration - Sets the user names and passwords for system access.
• TFTP Download - Downloads new version of firmware to update your sys-
tem.
• Configuration File - Allows downloading of a configuration file.
• Management Access Control - Allows management of user access to the
Switch.
Select OK to return to the previous panel.
17