Import Configuration File; Export Configuration File; Port Management > Port Setup; Basic Per Port Config - Linksys QuickVPN - PC User Manual

Chapter 4
System Management > Setting Backup

Import Configuration File

To import a configuration file, first specify where your
backup preferences file is located. Click Browse, and then
select the appropriate configuration file.
Import After you select the file, click Import. This process
may take up to a minute. Then restart the Router so that
the changes will take effect.

Export Configuration File

Export
To export the Router's current configuration file,
click Export.
File Download
Click Save, and then select the location where you want
to store your backup preferences file. By default, this file
will be called RV082.exp, but you may rename it if you
wish. This process may take up to a minute.
Port Management > Port Setup
Configure the connection settings for each local port,
such as priority, speed, and duplex. You can also enable or
disable the auto-negotiation feature for all ports.
10/100 8-Port VPN Router
Advanced Configuration
Port Management > Port Setup

Basic Per Port Config.

The Basic Per Port Config. table displays the following:
Port ID The port number or name is displayed.
Interface The port's interface type, LAN or WAN1/2, is
displayed.
Disable To disable a port, select Disable.
Priority For port-based QoS, select the appropriate
priority level, High or Normal.
Speed Select the port speed, 10M or 100M.
Duplex Select the duplex mode, Half or Full.
Auto Neg. Select Enable if you want the Router's ports
to auto-negotiate connection speeds and duplex mode;
then you will not need to set up speed and duplex settings
separately.
VLAN
For each LAN port, a VLAN (a Virtual LAN, or
network within your network) can be established. Up to
eight VLANs can be established.
Click Save Settings to save your changes, or click Cancel
Changes to undo them.
Port Management > Port Status
Status information is displayed for the selected port.
31