Linksys EF1324 User Manual page 8

2. The following screen will appear. Enter a Name for this connection. In the
example below, the name of the connection is EF1324. Click the OK but-
ton.
3. The following screen will appear. In the bottom drop down box labeled
Connect using:, click the arrow and choose the COM port that the Switch
will be connected to. In the example below, COM1 is the port selected.
Click the OK button.
8
Instant EtherFast Series
®
EtherFast Layer 3 Management 24-Port 10/100 + 2-Port Gigabit Ethernet Switch
®
4. When the following screen appears, make sure that the port settings are as
follows:
19200
8
None
1
None
Click the OK button.
Web Management
The IP address is already configured on the Switch by default. Use a standard
Web browser (Internet Explorer 4.0 or above, or Netscape Navigator 4.0 or
above is suggested) from any computer attached to the network. The Switch has
a default IP address of 192.168.1.254 and a default subnet address of
255.255.255.0.
9