Table of Contents
Advertisement
•
Poll Interval - After beginning to hear a router's Hello Packets, the
period of time after its neighbors declare the router to be up.
•
Authentication Type - Identifies the authentication procedure to be
used on the attached network.
•
Authentication Key- The configured data allows the authentication
procedure to verify OSPF protocol packets received over the interface.
Select Apply to make changes. Select OK to return to the previous panel.
Select Cancel to cancel any changes.
54
Instant EtherFast
Series
®
EtherFast
Layer 3 Management 24-Port 10/100 + 2-Port Gigabit Ethernet Switch
®
Subnet Configuration: Modify DVMRP Configuration
The Subnet Configuration: Modify DVMRP Configuration screen
allows you to modify the DVMRP parameters.
•
Metrics - This value is used to select the best reverse path to networks
that are connected directly to an interface on the Switch.
•
Probe Interval - The interval between sending neighbor probe mes-
sages to the multicast group address for all DVMRP users.
•
Neighbor Timeout - The interval to wait without hearing from a
DVMRP neighbor before declaring it dead.
Select Apply to make changes. Select OK to return to the previous panel.
Select Cancel to cancel any changes.
55
Advertisement
Table of Contents
