Adjusting Output Video; Adjusting Input Video - Roland SR-20HD Reference Manual

Adjusting Output Video

Here's how to adjust the output image appropriately for the device
that's receiving the SR-20HD's output.
[MENU] button Ó "Video Output" Ó
1.
select "HDMI OUT MAIN" or "HDMI OUT PVW", and
then press the [VALUE/CURSOR] knob.
A detailed menu appears.
2. Turn the [VALUE/CURSOR] knob to select a menu item,
and then press the [VALUE/CURSOR] knob.
Menu item Explanation
Shows the status of the HDMI OUT (MAIN, PVW)
Status
connector.
Specifies the color space (system for representing
Color Space
colors in video).
Specifies the type of output signal.
DVI-D/HDMI
Brightness Adjusts the brightness.
Adjusts the contrast.
Contrast
Saturation Adjusts the saturation.
Adjusts the red level.
Red
Green Adjusts the green level.
Blue Adjusts the blue level.
HDMI OUT PVW only
Specifies the output bus that is assigned to the
Output Assign
HDMI OUT PVW connector.
3. Turn the [VALUE/CURSOR] knob to change the value
of the setting, and then press the [VALUE/CURSOR]
knob.
4.
Press the [MENU] button to quit the menu.
You can output a test pattern, useful for adjusting the image quality of
a display.
[MENU] button Ó "System" Ó "Test Pattern" to select the type of test
pattern.

Adjusting Input Video

Here's how to adjust the quality and scaling of the video signals that
are assigned to the INPUT [HDMI IN 1]–[STILL 2] buttons.
[MENU] button Ó "Video Input" Ó select "HDMI IN 1"–
1.
"STILL 2", and then press the [VALUE/CURSOR] knob.
A detailed menu appears.
2. Turn the [VALUE/CURSOR] knob to select a menu item,
and then press the [VALUE/CURSOR] knob.
Menu item Explanation
HDMI IN 1, 2 only
Displays information about the input video
Status
(video format, size, etc.).
Specifies the color space (system for representing
colors in video).
Color Space
If this is set to "Auto", an appropriate color space is
automatically applied.
Flicker Filter If this is "On", flickering is reduced.
STILL 1 only
Selects the memory number in which the still
Still Memory
image is saved.
HDMI IN 1, STILL 2
Zoom Adjusts the zoom ratio.
Specifies the scaling type.
Scaling Type
* The scaling type for STILL 1 and 2 is fixed at
"Full".
Manual Size H
Adjusts the horizontal size.
Manual Size V Adjusts the vertical size.
Position H
Adjusts the horizontal position.
Position V Adjusts the vertical position.
Brightness
Adjusts the brightness.
Contrast Adjusts the contrast.
Saturation
Adjusts the saturation.
3. Turn the [VALUE/CURSOR] knob to change the value
of the setting, and then press the [VALUE/CURSOR]
knob.
4. Press the [MENU] button to quit the menu.
When using video from USB VIDEO IN
Make the following settings.
Ó
¹ Press the [MENU] button
set to "Video Only".
Ó
¹ Press the [MENU] button
set to "USB VIDEO IN".
¹ Set USB STREAM to "720p29.97" or "720p25" for the product to
connect.
Video Input/Output Settings
Ó
"System" "USB VIDEO IN Mode" and
Ó Ó
"Video Input" "STILL 1" "Type" and
11