Table of Contents
Advertisement
Other Features
Saving Internal Settings to an SD Card
You can save the settings of this unit as a single file (.sr20) to a SD card. You can use the saved settings file by loading it from the USB flash drive
into this unit when necessary.
NOTE
¹ When using a SD card for the first time, you must format it using
the SR-20HD (p. 7).
¹ Never turn off the power or remove the SD card while the message
"Processing... " is shown.
¹ Depending on the SD card, recognition of the SD card might take
some time.
Saving
Saving a new file
[MENU] button Ó "SD card/USB Memory" Ó select
1.
"Save Setting as", and then press the [VALUE/CURSOR]
knob.
A confirmation message appears.
If you want to cancel the operation, select "Cancel".
2.
Turn the [VALUE/CURSOR] knob to select "OK", and
then press the [VALUE/CURSOR] knob.
When the operation is finished, the message "Completed" appears.
3.
Press the [VALUE/CURSOR] knob to close the message.
4.
Press the [MENU] button to quit the menu.
Content that is not saved to the file
¹ The System menu settings "Test Pattern". The unit always starts with
this "Off".
¹ The still images loaded into the unit. Only the file names of the still
images are saved.
¹ The state of the [ON AIR] button. The unit always starts with this lit.
¹ The state of the AUDIO FUNCTION button to which the audio player
is assigned. This is always off when the unit starts up.
¹ The positions of the volume knobs and faders.
42
Overwrite-saving
[MENU] button Ó "SD card/USB Memory" Ó select
1.
"Save Settings", and then press the [VALUE/CURSOR]
knob.
The settings files in the SD card are listed.
2.
Turn the [VALUE/CURSOR] knob to select the setting file
to overwrite, and then press the [VALUE/CURSOR] knob.
A confirmation message appears.
If you want to cancel the operation, select "Cancel".
3.
Turn the [VALUE/CURSOR] knob to select "OK", and
then press the [VALUE/CURSOR] knob.
When the operation is finished, the message "Completed" appears.
4.
Press the [VALUE/CURSOR] knob to close the message.
5.
Press the [MENU] button to quit the menu.
Loading
Here's how to load this unit's settings that you saved on a SD card.
When you load settings, the current settings are overwritten.
[MENU] button Ó "SD card/USB Memory" Ó select
1.
"Load Settings", and then press the [VALUE/CURSOR]
knob.
The settings files in the SD card are listed.
2.
Turn the [VALUE/CURSOR] knob to select the setting file
to recall, and then press the [VALUE/CURSOR] knob.
A confirmation message appears.
If you want to cancel the operation, select "Cancel".
¹ When you select "System Only", only the Network, Stream, Record
and System settings can be recalled.
3.
Turn the [VALUE/CURSOR] knob to select "OK", and
then press the [VALUE/CURSOR] knob.
When the operation is finished, the message "Completed" appears.
4.
Press the [VALUE/CURSOR] knob to close the message.
5.
Press the [MENU] button to quit the menu.
Advertisement
Table of Contents
