Removal Of Swing Motor / Pcbs - Daikin FTXS20K2V1B Service Manual

Si041140

7. Removal of Swing Motor / PCBs

Procedure
Step
1. Remove the shield plate
(2).
1 Unfasten the hooks at
the upper 2 positions of
the shield plate (2).
2 Unfasten the hook at
the lower position,
and remove the shield
plate (2).
2. Remove the swing motor.
Remove the screw of
1
the swing motor.
Removal Procedure
Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Procedure
Electrical box
Hook
Removal of Swing Motor / PCBs
Preparation
Shield plate (2)
(R14603)
Hook
(R16650)
Swing motor
(R11650)
Points
Remove the electrical box
according to the "Removal
of Electrical Box".
13