Si041258EA
7. Swing Motor / PCBs
Warning
Step
1. Remove the swing motor.
Remove the screw of
1
the swing motor.
2
Unfasten the hook and
disconnect the
connector.
2. Remove the PCBs.
1
Unfasten the hooks at
the upper 2 positions of
the shield plate (2).
2
Unfasten the hook at
the lower position,
and remove the shield
plate (2).
Removal Procedure
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Procedure
Shield plate (2)
Swing motor
(R11650)
(R8037)
Hook
Electrical box
(R14603)
Hook
(R16650)
Swing Motor / PCBs
Points
The connector of the swing
motor has a hook.
Press the hook with a flat
screwdriver to unfasten it.
(R14847)
9