Grounding Instructions - Lindhaus Health Care Owner's Manual

VERSION FOR U.S.A. COMMERCIAL MARKET
Connect to a properly grounded outlet only. See grounding instructions.
G R O U N D ING INSTRUCTIONS
WARNING
This machine must be properly grounded to protect the operator from electrical shock.
Read the safety instructions below before operating this machine.
120 volt machines have this kind of
three-prong plug at the end of a t h r e e
wire electrical cord. The grounding pin
on this plug grounds the machine when
it is plugged into a three-prong outlet.
Replace the plug if the grounding pin is damaged or broken.
The green (or green/yellow) wire in the cord is the grounding wire. When replacing
a plug, this wire must be attached to the grounding pin only.
Extension cords connected to this machine should be 12 gauge, three-wire cords
with three-prong plugs and outlets. Do not use extension cord more than 50 feet (15
m.) long.
OUTLET BOX
THREE-PRONG
G R O U N D E D OUTLET
A grounding adapter must be
installed as shown here if only
two-prong outlets are available.
The outlet box must be grounded
and the grounding tab (or wire) on
the adapter must be installed under
the head of screw in the center of
the outlet cover. 120 volt plugs
are available at most hardware
stores.
Grounding adapters are not
approved for use in Canada.