MIC inteox 7100i
You can also launch the device webpage directly. In the device webpage, an initial password
page appears, displaying input fields and a password strength gauge.
Enter the user name ("service") and a password in the appropriate fields. Refer to the section
User Management for more information.
After a service-level password is set for the device, the device displays a dialog box that
prompts users to enter the user name ("service") and the service-level password every time
that they access the device.
1.
2.
Note: New releases of software may require you to set a new and stronger password.
Bosch Security Systems
Fill in the fields User name and Password.
Click OK. If the password is correct, the desired page appears.
User Manual
Introduction | en
7
2022-09 | 1.18 |