54
en | Alarm
–
–
–
This alarm alerts users if anyone tries to open the housing of the device.
Note for MIC IP cameras only:
Alarm output is available only when the field Application variant in the Installer Menu is set to
[camera name] - IO" (for a camera connected to MIC-ALM-WAS-24)
Click the checkbox Enabled to activate the alarm.
Click Set to save. The camera's system activates the alarm rules.
2022-09 | 1.18 |
Connection: If you select this option, then an alarm will begin when an attempt is made
to access the camera's IP address.
Time: If you select this option, then an input field appears to the right. In this field, enter
the time for the activation of the alarm in hours and minutes. (The default value is 00:00.)
Time range: If you select this option, then two input fields appear to the right. In these
fields, enter the time range for the activation of the alarm in hours and minutes. (The
default values are 00:00 and 00:00.)
User Manual
MIC inteox 7100i
Bosch Security Systems