Bosch MIC inteox 7100i User Manual page 20

20 en | Camera
If you have enabled the Transparent background option, the background color is not
displayed in the OSD.
Transparent background
Check this box to make transparent the stamp background on the image.
Info stamping
Enable
Check this box to activate the stamping.
The Position (XY) is displayed to enter the values in the X and Y position fields.
Stamping size
Select the desired font size of the overlays on the OSD: Normal or Large.
Select Custom to enable the Font size (‰) field.
Font size
Enter a number for a custom size (percentage) of the font, from 1 to 1000.
Text color
Select the color for the alarm message to be displayed in.
Background color
Select the background color for the alarm message to be displayed in.
If you have enabled the Transparent background option, the background color is not
displayed in the OSD.
Transparent background
Check this box to make transparent the stamp background on the image.
Title region
Select On to set or to edit the position of the Title region on the OSD.
The fields Position (XY) and (0...255) appear.
1.
2.
Select Off to hide the region from view.
Stamping size
Select the desired font size of the overlays on the OSD: Normal or Large.
Select Custom to enable the Font size (‰) field.
Font size
Enter a number for a custom size (percentage) of the font, from 1 to 1000.
Text color
Select the color for the alarm message to be displayed in.
Background color
Select the background color for the alarm message to be displayed in.
If you have enabled the Transparent background option, the background color is not
displayed in the OSD.
Transparent background
Check this box to make transparent the stamp background on the image.
Telemetry region
Select On to set or to edit the position of the telemetry information (azimuth and elevation
(pan/tilt position)) and the zoom factor on the OSD. Refer to the section " PTZ Settings, page
34 " to set the pan and tilt limits.
The fields Position (XY) and (0...255) appear.
1.
2022-09 | 1.18 |
In the field Position (XY), specify the exact position. (The default is 10.)
In the field (0...255), enter the position range. (The default is 176).
In the field Position (XY), specify the exact position. (The default is 10.)
User Manual
MIC inteox 7100i
Bosch Security Systems