Lexmark T430 Technical Reference page 290

Table 4-11: PostScript Emulation Device Parameters (Continued)
Key Type
PCLSmartSwitch boolean
PortLocation string
PSSmartSwitch boolean
Type name
Device Parameters for the Communication Device %EtherTalk%, %EtherTalkA%, %EtherTalkB%, %EtherTalkC%,
%EtherTalkD%
(%EtherTalk_NV% and %EtherTalk_Pending% contain the same parameters)
DelayedOutputClose boolean
Enabled boolean
EthernetAddress string
EtherTalkType string
EtherTalkZone string
Definition
Supported values are:
True PCL SmartSwitch is On.
False PCL SmartSwitch is Off.
For more information, see "Using SmartSwitch" on page 2-1.
(Read-only) Designates the physical location of the port related to the parameter set.
Supported values are:
Standard Port
Option Slot 1
Option Slot 2
Option Slot 3
Supported values are:
True PS SmartSwitch is On.
False PS SmartSwitch is Off.
For more information, see "Using SmartSwitch" on page 4-1.
(Read-only) Always returns the value of /Communications.
Selects how the printer manages the port at the end of each print job. Supported values are:
True An end-of-file message is not sent until the current job and all preceding jobs
finish printing.
False An end-of-file message is sent as soon as a job finishes executing in the
interpreter, whether or not that job has finished printing.
This value is set independently for each port.
(Read-only)
Supported values are:
True
False
(Read only) The Ethernet address of the Ethernet internal print server.
Legal value: Any string of 17 or fewer non-null characters.
The "type" of the EtherTalk interface entity name. This parameter also sets the
LocalTalkType parameter to the same value. The new value is returned by the
appletalktype compatibility operator.
Legal value: Any string of 32 or fewer non-null characters. Default value is LaserWriter.
Note: Setting this variable does not affect the value for other physical internal print servers.
The statusdict string appletalktype is correct for the current job port.
The "zone" of the EtherTalk interface entity name.
EtherTalkZone is read/write only to RAM. There is no NVRAM variable for EtherTalkZone.
Legal value: Any string of 32 or fewer non-null characters.
4-76
PostScript