Lexmark T430 Technical Reference page 205
Lexmark t430: reference guide
Hide thumbs
Also See for T430:
- Service manual (249 pages) ,
- Specifications (2 pages) ,
- Quick reference (2 pages)
Table of Contents
Advertisement
Table 3-22: Variables for Flash and Disk File and Password Commands (Continued)
Parameter
Syntax
START =
Note:
LOPENFILE Command
Use this command to open a file on a storage device.
Syntax:
LCLOSEFILE Command
Use this command to close a file on a storage device. The command is ignored if the
file doesn't exist on the device or if the file is not open.
Syntax:
Description
The location in the file to begin writing or reading. Use an integer that
represents an offset in bytes from the beginning of the file.
Optional for both LREADFILE and LWRITEFILE commands. If this parameter
is omitted from an LREADFILE command, a
the file) is assumed. If it is omitted from a LWRITEFILE command with an
If a START location is provided but it is greater than the file size, the
LREADFILE command response will contain no file data. Similarly, an
LWRITEFILE command with an
LWRITEFILE command with an
If PostScript emulation is used to create the file on the device, it may
automatically attach a
Extensions" on page 6-10 for more information. For example, if
downloaded to flash through PostScript emulation, the
commands is
3-89
of
, a
of
is also assumed.
extension to the
.
PJL
of
(beginning of
of
functions like an
of
.
. See "Filename
is
on the PJL
Advertisement
Table of Contents
